XFLY-MODEL GLASTAR 1233 PNP V2
XFLY-MODEL GLASTAR 1233 PNP V2
The new XFly GlaStar bush/trainer plane is a high performance, durable, all terrain, STOL-capable, high-wing sport model. The GlaStar’s impressive flight characteristics and large air-filled shock-absorbing tires makes short takeoffs and landings on any type of surface easy!
R4600,00
Availability: 2 in stock
More Info
XFly GlaStar 1233mm PNP V2
Description
The V2 version under a new decoration is equipped with a new 40A ESC for 3S or 4S power supply.
The new XFly GlaStar bush/trainer plane is a high performance, durable, all terrain, STOL-capable, high-wing sport model. The GlaStar’s impressive flight characteristics and large air-filled shock-absorbing tires makes short takeoffs and landings on any type of surface easy!
The Glasair GlaStar (sometimes Glastar) is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation.
The XFly GlaStar model comes equipped with a magnetic released top hatch compartment to fit 3S 1300-2200mAh batteries which will provide a wide range in performance and flight times. The GlaStar is a perfect choice for a wide range of pilots to enjoy flight after flight!
Features
- A sport STOL plane that can be enjoyed by a wide range of pilots
- Designed with a larger wing to provide a low wing load to deliver short takeoff and landings (STOL)
- Made from lightweight durable composite-reinforced EPO and ABS plastic
- Equipped with a magnetic released top hatch compartment to fit 3S 1300-2200mAh batteries which will provide a wide range in performance and flight times up to 10 minutes
- Digital servos with ball-link equipped linkages deliver crisp and precise control at every speed
- Unique over-sized pair of air-filled pneumatic tires that deliver great bounce and rebound resiliency. These wheels make hard or uneven terrain landings/takeoffs possible
Technical Specifications
- Wingspan: 1233mm / 48.5in
- Length: 945mm / 37.2in
- Wing load: 49g/dm²
- Wing Area: 24.5dm²
- Flying weight: around 1200g
- Ailerons: Yes
- Elevator: Yes
- Rudder: Yes
- Flaps: No
- Fixed Landing Gear
- Recommended Radio: 4 channel
- Recommended environment: Outdoor
- Flying time: Approx. 10 minutes
- Takeoff/Landing: runway / short grass or dirty field
- Mounting duration: around 15 minutes
Content
- XFly GlaStar 1233mm PNP
- Propeller: 10*6 2 blade
- Motor: 1x Brushless Outrunner 3136-KV1000
- ECS: 1x 40A with EC3 connector
- Servos: 4x9g Digital
Required
- 4-Channel radio transmitter
- 4-Channel receiver
- 3-Cell 11.1V 1300-2200mAh with EC3 connector
- Or 4-Cell 14.8V 1800-2600mAh with EC3 connector
- 3-Cell Or 4-Cell compatible battery charger
Data Sheet
| Type of kit: | PNP |
| Wingspan (mm): | 1233mm / 48.5in |
| Length (mm): | 945mm / 37.2in |
| Flying weight (gr) | around 1200g |
| Wing Surface Area: | 24.5dm² |
| Wing Loading: | 49g/dm² |
| CG (Center of Gravity) | Check manual |
| Servos | 4x 9 gr standard gear digital |
| Servo type: | Digital |
| Propeller | 10*6 2-blade |
| Power System | Brushless 3136-KV1000 |
| Turns/min/Volt (Kv): | 1000 |
| Motor Type: | Out-Runner |
| Electronic Speed Control | 40A |
| Battery Type | LiPo-Accu |
| Battery Cells: | 3s – 11.1v |
| Battery Capacity (mAh) | 1.300 mAh |
| Connection: | EC-3 |
| Surfaces | Rudder |
| Landing Gear | Fixed landing gear |
| Material | ABS |
| Build time | 15 minutes |
| Required Radio | 4 channels minimum |
| Recommended pilot skill level | Beginner |
| Wingspan | 650mm to 1249mm |
